| | |
If you find an identical Victron product advertised at a lower price than ours, we will match it. Our general UK mainland carriage charge is £12.50, but this may vary on items such as Batteries etc.
Delivery is often next working day, but may be 3-4 working days.
All prices shown exclude VAT which will be added at the checkout phase
| Gas Instant Water Heaters
|
|
|
 | N250 Morco F-11E, Compact Room Sealed 11L Water Heater
The Morco F-11E is a great, economical, modern water heater
It is fully modulating which means it will shrink down to accommodate whatever water supply is available, (down to 3 ltr. per minute), before extinguishing and will work on less water pressure than the Morco D61B.
It has simple user controls with fully electronic, mains operated ignition (no batteries).
There is no restriction on where it can be fitted (sleeping areas, bathrooms, toilets are all OK) as it is room sealed and it can be used as a direct replacement for any existing boiler. The flue is through the side of the wall, so no unsightly chimneys.
- Dimensions h595 x w330 x d24 mm
- Gas supply - Propane 37 mbar
- Uses only 35 watts of mains electricity (this enables operation on 12V or 24V through a small 50 watt inverter)
- Power output range 6.7 - 19.2 kw
- Water flow range at 25oC rise (L/min.) 3.7 -11
- Min. operating water pressure 0.18 bar
- Gas and water connections: 15mm
- Water flow range at 50oC rise (L/min.) 2.3 - 5.5
- Max. water pressure 13 bar
- Electrical supply and power consumption 220V 35 watts
Flue diameter 100mm
- Weight 15.5 Kgs
List Price £372.67 + vat
Our Price : £335.40 / €436.02
|
| |
|
N250/F Flue Pipe for Morco F-11E
Optional vertical roof flue
Includes cowl
List Price £121.59
Our Price : £109.43 / €142.26
|  |
| |
|
 | N210/B Morco D61B Instantaneous Water Heater with Piezo (manual) Ignition
• Delivers 6l of water per minute
• Incorporates flame failure device
• Easy drain down.
• Heat output 8.7kW.
• Gas consumption: 0.8kg/h.
• Water pressure: Min 1 bar, Max 10bar.
Connections
• Gas 15mm compression,
• Water 15mm straight copper.
• Weight 7.1kg
• Flue size: 83mm
• Gas type
• Butane 28mbar
• Propane 37mbar
• Dimensions: H573mm x W266mm x D190mm
• Suitable replacement for Paloma Models
• Same flu outlet size as Paloma
• Proof of fitting by a corgi registered engineer required for any warranty issue.
Usual Price £168.67 + VAT
Our Price : £151.80 / €197.34
|
| |
|
N210 Morco D61E Instantaneous Water Heater with Electronic (2 x AA Battery) Ignition.
• Delivers 6l of water per minute
• Incorporates flame failure device
• Easy drain down
• Stylish design designed for wall mounting
Specifications
• Heat output: 8.7kW.
• Gas consumption 0.8kg/h
• Water pressure Min 1 bar, Max 10bar
Connections
• Gas 15mm compression
• Water 15mm straight copper
• Weight: 7.1kg
• Flue size: 83mm
Gas type
• Butane 28mbar
• Propane 37mbar
• Dimensions: H573mm x W266mm x D190mm
• Suitable replacement for Paloma Models
• Same flu outlet size as Paloma
• Electric ignition requires standard AA pencil battery.
• Proof of fitting by a corgi registered engineer required for any warranty issue.
Usual Price £176.00
Our Price : £158.40 / €205.92
| |
| |
|
 | N151/K Universal water heater flue kit
Universal water heater fl ue kit, suitable for use with Morco D51 & D61,
All Paloma, Vaillant MAG 125, Rinnai, Saunier Duval SD14 & Chaffoteux
Includes
* adaptor collar
* inner flue pipe
* roof flange
* outr pipe and cowl
Not recomended for marine use.
Our Price : £28.51 / €37.06
|
| |
|
N151/C Cowl for PALOMA / MORCO
Silver Finish
See cowl dimensions
Our Price : £19.25 / €25.03
|  |
| |
|
 | N151/C/B Cowl for PALOMA / MORCO
Black finish
see cowl dimensions
Our Price : £19.25 / €25.03
|
| |
|
N151/F Flue pipe for PALOMA/MORCO
Flue pipe for PALOMA/MORCO - new type to meet legislation
420mm / 350mm - twin walled enamel
WHITE
Our Price : £12.00 / €15.60
|  |
| |
